No-Warp Foam Window & Door Insulating Sealant
Touch ‘n Seal No-Warp Foam is formulated to permanently seal around doors, windows and skylights without bowing jambs or deflecting frames. It exerts up to 95% less bowing pressure than competitive foams that may inhibit or prevent proper opening and closing of fenestrations.
The expanding polyurethane foam sealant seals cracks and gaps up to 1-1/2” (38mm) wide to insulate and blocks drafts, moisture and insects resulting in improved comfort and reduced energy usage. It is formulated to meet the insulating and air sealing requirements of the professional commercial, industrial, agricultural and residential contractor and can be used on wood, masonry, insulating foam boards, metal, plastics and sheetrock.
Once cured, it is non-toxic and fire-retardant.
Features & Benefits
- Packaged in 20 oz. can
- Yield (¼" bead) - 2,200 linear feet
- Low expansion and pressure during cure for sealing windows and doors (AAMA #812-04)
- Bright white in color
- Density - 1.3-1.8 lbs./cu.ft.
- R Value - 4.5 per inch thickness
- Max. Service Temp for Cured Foam - 250ºF (121ºC)
- Shelf Life - 18 months
- Class A fire resistance
- Flame Spread - 10 (4 x ½" bead)
- Smoke Developed - 15 (4 x ½" bead)
- ICC-ES ESR-1926 approved
- Tack-Free Dry Time - 12 minutes
- Full Cure Time - 1 hour
Technical Information
No-Warp Foam - Safety Data Sheet (PDF)
No-Warp Foam - Technical Data Sheet (PDF)
Gun Foam Use Guidelines (PDF)
ICC-ES Evaluation Report (PDF)
LEED Document (PDF)
Accessories
Improve productivity with our line of Sharpshooter Foam Applicators and Poly-Clean polyurethane foam cleaner designed specifically for use with Touch ‘n Seal Gun Foams and Adhesives.